ApplyLabWork Resin DLP Modeling in the color Clear is great for models that require translucency and clarity. Very minimum yellowing after post-curing. 

• clear material - very minimum yellowing after post-curing
• calibrated on SprintRay’s MoonRay printers, Gray Material Selection
• for DLP-type printers
• Tensile strength (62-70Mpa) / Elongation (1-5%)
• VOC-free, very low odor
• ideal for models that require  translucency and clarity

Technical Specification

• Color: Clear
• Elongation: 1-5%
• Hardness (Shore): 86-88 D
• Flexural Modulus: 1700-2000 MPa
• Viscosity at 77°F/25°C: 340-380
• Tensile: 62-70 MPa
• Impact: 28-30 J/m
• Flexural Strength: 82-90 MPa
• HDT(°F/°C): 130.82/54.9
• Size: 1L
  

Links

• Printing Tips
• Calibration Tutorial for other DLP open-source 3d printers

• Make sure to store the resin in dark and room temperature
• Always wear protective gloves during working with resin
• For more information please check the "Downloads" section

Warranty

• Please visit Terms and Conditions page
• If you have any questions do not hesitate to contact us