ApplyLabWork Resin MSLA Prototype Engineering Series - Heat in the color Gray is the first engineering resin for LCD masked printers made from ApplyLabWork with a heat deflection temperature (HDT) of 250°C at 0.45 MPa. It is ideal for prototype parts that will come in contact with high temperatures. MSLA Heat Resin prints precise models that hold their shapes with high thermal stability.

• high-temperature resin - a heat deflection temperature of 250°C at 0.45 MPa
• for all LCD-masked printers - such as Phrozen, AnyCubic and etc.
• print layer thickness -  100, 50 microns
• Tensile Strength (60-80 MPa) / Elongation (1-3%)
• minimum odor

Technical Specification

• Color: Gray
• Elongation: 1-2%
• Hardness (Shore): 85-87 D
• Flexural Modulus: 2550-2650
• Viscosity: 450-550 cP
• Tensile: 55-75 MPa
• Impact: 19-25 J/m
• Flexural Strength: 130-145 MPa
• HDT(°F/°C): 228.2/109
• Size: 1L

Links

• Printing Tips
  
• MSLA Heat Gray
  

• Make sure to store the resin in dark and room temperature
• Always wear protective gloves during working with resin
• For more information please check the "Downloads" section

Warranty

• Please visit Terms and Conditions page
• If you have any questions do not hesitate to contact us