ApplyLabWork Resin SLA Modeling 200 in the color Gray is the fastest and most efficient resin from ApplyLabWork. It is suitable for applications where scale and efficiency are required. It also exhibits high accuracy and a smooth surface, great for many dental applications. Modeling 200 is similar to Draft resin and can print up to 4 times faster than the other ApplyLabWork Modeling resins. It supports both 200 and 100-micron print resolutions and prints with a Draft V2 profile.

• very fast printing - can print even up to 4 times faster than some resins from ApplyLabWork.
• calibrated on Formlabs 3D Printers - calibrated on Form2 and Form3
• Preform Material Selection - Draft V2
• print layer thickness - 200, 100 microns
• Tensile Strength (57-59 MPa) / Elongation (3-7%)
• minimum odor
• ideal for dental applications

Technical specifications

• Color: Gray
• Elongation: 3-7 %
• Hardness (Shore): 86-88 D
• Flexure Modulus: 1700-2000 MPa
• Viscosity at 77°F/25°C: 675-825
• Tensile: 57-59 MPa
• Impact: 43-44 J/m
• Flexural Strength: 92-104 MPa
• HDT(°F/°C): 138.02/58.9
• Size: 1L
  

Links

• Printing Tips for Form 2 and Form 3 3d printers

• Make sure to store the resin in dark and room temperature
• Always wear protective gloves during working with resin
• For more information please check the "Downloads" section