BASF Filament Ultrafuse PET CF15 – 1.75mm

BASF Filament Ultrafuse PET CF15 is a polyethylene terephthalate reinforced with 15% carbon fiber and is a functional 3D printing material optimized to meet your requirements. Its high dimensional stability and very low moisture absorption make it a perfect material in a humid environment. The heat-resistant property, strength, and stiffness of Ultrafuse PET CF15 make this filament highly suitable for a wide range of industrial applications. 

Ultrafuse PET CF15 combines easy processability, very low moisture uptake, and affordability with great strength and stiffness. Applications that require strong and stiff parts with an excellent surface finish will benefit from Ultrafuse PET CF15.

• high dimensional stability
• heat resistant - up to 108°C
• very low moisture absorption
• low abrasion
• compatible with soluble support - works with BVOH and HIPS support
• strong & stiff parts
• excellent surface finish
• ideal for functional prototyping- great for printing jigs & fixtures, automotive parts, and applications for humid operating environments
• for FFF/FDM 3D Printers 

Technical Specification

• Package size: 750g 
• Density: 1.37 g/cm3
• HDT @ 0.45 MPa: 108 °C
• Young's Modulus: 6178MPa (XY) and 2822MPa (ZX)
  
• Elongation at Break: 3.7% (XY) and 0.5% (ZX)
• Flexural Strength: 108MPa (XY) and 19.7MPa (ZX)
• Tensile Strength: 63.2MPa (XY) and 12.5MPa (ZX)
• Impact Strength Charpy(notched): 5.4kJ/m2 (XY) and 0.5kJ/m2 (ZX)
• Nozzle Temp: 250-270℃
• Bed Temperature: 65-85℃
• Print Speed: 30-80mm/s

• Make sure to store the filament in a dry place in tightly closed containers
• For more information please check the "Downloads" section 

Warranty

• Please visit Terms and Conditions page
• If you have any questions do not hesitate to contact us