BASF Filament Ultrafuse PLA – 1.75mm

BASF Filament Ultrafuse PLA is Poly-Lactic-Acid, a biodegradable polymer with a low melting point. It is an easy material to print with and gives a smooth printing result. This most used 3D printing material is available in a wide range of RAL colors and translucent variants. When properly cooled, PLA has a higher maximum printing speed, lower layer heights, and sharper printed corners. Combining this with low warping of the print makes it a popular plastic for makers, prosumers, and schools.

• large color range - 24 colors available for 1.75mm and 25 for 2.85mm
• easy to print
• high success rater
• repeatability
• unique properties
• relatively low printing temperatures
• non/extremely low warpage/shrinkage
• ideal for general prototyping- great for printing at home, at work, and at schools
• for FFF/FDM 3D Printers 

Technical Specification

• Package size: 750g 
• Density: 1.25 g/cm3
• HDT @ 0.45 MPa: 65 °C
• Young's Modulus: 2308MPa (XY) and 2131MPa (ZX)
  
• Elongation at Break: 4.2% (XY) and 1.2% (ZX)
• Flexural Strength: 98MPa (XY) and 54.9MPa (ZX)
• Tensile Strength: 34.7MPa (XY) and 21.2MPa (ZX)
• Impact Strength Charpy(notched): 2.5kJ/m2 (XY) and 1.7kJ/m2 (ZX)
• Nozzle Temp: 210-230℃
• Bed Temperature: 50-70℃
• Print Speed: 40-80mm/s

• Make sure to store the filament in a dry place in tightly closed containers
• For more information please check the "Downloads" section 

Warranty

• Please visit Terms and Conditions page
• If you have any questions do not hesitate to contact us