BASF Filament Ultrafuse PPSU – 1.75mm

BASF Filament Ultrafuse PPSU is an advanced material developed for FFF 3D Printers based on BASF ́s advanced Ultrason materials. The Ultrason resins are amorphous thermoplastics derived from polyethersulfone (PESU), polysulfone (PSU), and poly- phenylsulfone (PPSU) and ensure very high thermal resistance. 

With its wide spectrum of material performance advantages, Ultrafuse PPSU can be successfully used in applications where other plastics, e.g. polyamide, polycarbonate, polyoxymethylene, and polyalkylene terephthalates, fail to meet the performance specifications. With its inherent flame-retardant properties, it is an especially suitable material for the aerospace industry.

• inherently flame retardant
• good aesthetics
• short-term temperature resistance - up to 220 °C
• resistant to long-term service - temperatures up to 180 °C
• high dimensional stability
• creep strength at high temperatures
• resistant to hot water and coolants
• oil-resistant - even at temperatures up to 170 °C
• fuel and fluorine resistant
• ideal for aerospace applications
• for FFF/FDM 3D Printers
  

Technical Specification

• Package size: 750g 
• Density: 1.27 g/cm3
• HDT at 0.45 MPa: 215℃
• Young's Modulus: 2221MPa (XY) and 2150MPa (ZX)
  
• Elongation at Break: 7.3% (XY) and 2.9% (ZX)
• Flexural Strength: 105MPa (XY) and 88.9MPa (ZX)
• Tensile Strength: 74.5MPa (XY) and 49MPa (ZX)
• Nozzle Temp: 390-410℃
• Build Chamber Temperature: 170-210℃
• Bed Temperature: 200-220℃
• Print Speed: 25-100mm/s

• Make sure to store the filament in a dry place in tightly closed containers
• For more information please check the "Downloads" section 

Warranty

• Please visit Terms and Conditions page
• If you have any questions do not hesitate to contact us