BASF Support Filament Ultrafuse HIPS is a high-quality engineering thermoplastic. HiPS is well known in the 3D-printing industry as a support material for ABS. But this material has additional properties to offer like good impact resistance, good dimensional stability, and easy post-processing.

HIPS material dissolves in D ‘limonene. Now you have the opportunity to create ABS models with complex geometry. With this lightweight material, your prints will have a beautiful matte finish. Ultrafuse HiPS is easy to post-process with glue or with sanding paper. The composition of the material makes it ideal for painting.

• easy post-processing
• good aesthetics
• support material especially for ABS - there is good compatibility between the two materials, HIPS is an easy-to-breakaway support
• good impact resistance
• good dimensional stability
• for FFF/FDM 3D Printers

Technical Specification

• Package size: 750g 
• Density: 1.02 g/cm3
• HDT at 0.45 MPa: 91℃
• Young's Modulus: 1588MPa (XY) and 1603MPa (ZX)
  
• Elongation at Break: 1.4% (XY) and 1.3% (ZX)
• Flexural Strength: 31.8MPa (XY) and 26.8MPa (ZX)
• Tensile Strength: 18.4MPa (XY) and 13.7MPa (ZX)
• Nozzle Temp: 240-260℃
• Bed Temperature: 100-120℃
• Print Speed: 40-80mm/s

• Make sure to store the filament in a dry place in tightly closed containers
• For more information please check the "Downloads" section 

Warranty

• Please visit Terms and Conditions page
• If you have any questions do not hesitate to contact us