BlueCast Resin Cr3a is one of the easiest castable resins to print and ensure excellent casting. Unlike other monomer-based resin that requires complex and tricky treatments, BC Cr3a just requires to be washed after printing and cured. No hot water wash is required, no boiling, and no overnight curing.

• consistent casting quality as BlueCast standard
• ash residual 0.00% _ proprietary TGA at 750°C / 4 hrs without contact to air, in a closed vessel
• low cost – negligible shrinkage
• no primer needed
• monomer-based resin - tested as not toxic / not carcinogenic
• high resolution
• good strength
• fast printing speed
• very low odor
• very low viscosity, no need to heat
• for LCD-type 3D Printers

Technical Specification

• Volume: 0.5kg
• Castable: YES
• Print resolution: High
• Resin color: Blue
• Post-printing shrinkage: Low
• Post cleanup: Ethyl / IPA alcohol - Drying with compressed air
• Post UV cure: Cure it for 30/40min

Links

• Chitubox Profiles

Safety Rules

• Make sure to store the resin in dark and room temperature
• Always wear protective gloves during working with resin
• For more information please check the "Downloads" section 

Warranty

• Please visit Terms and Conditions page
• If you have any questions do not hesitate to contact us