eSUN Filament ePA-CF in the color Natural was developed based on nylon 6/66 copolymer, adding 20% carbon fiber greatly enhances the strength, rigidity, and toughness of nylon, and can replace metal materials on many occasions. Self-lubricating wear resistance makes it suitable for printing gears. High toughness and impact resistance make it suitable for printing durable parts. High-temperature resistance, heat deformation temperature up to 155℃. Low shrinkage, it is not easy to warp and crack when printing, and the surface of printed models is matte and delicate.

• heat resistance
• high intensity
• high rigidity
• high toughness
• high impact resistance
• abrasive resistance
• high dimensional stability
• matte surface effect
• excellent printability
• ideal for printing functional prototypes
• for most FFF/FDM 3D Printers

Technical Specification

• Package size: 1 kg 
• Density: 1.24 g/cm3
• Heat Distortion Temp (℃,0.45MPa): 155
• Tensile Strength: 140 MPa
• Flexural Strength: 140 MPa
• EAB: 10.61%
• Flexural Modulus: 4363 MPa
• Impact Strength: 18.67 kJ/㎡
• Extruder Temp: 260 – 300℃
• Bed Temp: 45 – 60°C
• Printing Speed:  40 – 100mm/s
• Heated Bed:  Optional

Note

• Before printing, we suggest drying the filament for 12 hours at 70°C

• Make sure to store the filament in a dry place in tightly closed containers
• For more information please check the "Downloads" section 

Warranty

• Please visit Terms and Conditions page
• If you have any questions do not hesitate to contact us