eSUN Filament HIPS is a completely soluble material in limonene. No residue on the surface of the model after dissolution and the contact surface is smooth and flat. The printing performance is similar to ABS and can be used for ABS, and PETG. The material is ideal for complex shapes and supports material having the shape of a partially enclosed chamber. The HIPS material is suitable for multi-nozzle printers.

• support material
• soluble in limonene
• high toughness and impact resistance
• heat resistance
• ideal working with ABS, and PETG filaments
• ideal for parts with complex shapes
• for most FFF/FDM 3D Printers with 2 nozzles

Technical Specification

• Package size: 1 kg 
• Density: 1.05 g/cm3
• Heat Distortion Temp (℃,0.45MPa): 200
• Tensile Strength: 27 MPa
• Flexural Strength: 39 MPa
• EAB: 55%
• Flexural Modulus: 2280 MPa
• Impact Strength: 11 kJ/㎡
• Extruder Temp: 230 – 270℃
• Bed Temp: 100 – 115°C
• Printing Speed:  40 – 100mm/s
• Heated Bed: Required

• Make sure to store the filament in a dry place in tightly closed containers
• For more information please check the "Downloads" section 

Warranty

• Please visit Terms and Conditions page
• If you have any questions do not hesitate to contact us