FEPshop Resin Tough has been specifically designed for LCD-type 3D Printers and DLP 3D Printers. The material has good mechanical properties, is tough, and is high-detailed.  After printing can be further post-processed like drilling, tapping, and assembling.  The resin is available in 4 colors: Clear/ White/ Grey/ and Black.  

• great resolution and high-detailed resin
• high surface hardness
• non-brittle
• anti-scratch
• good tenacity 
• can be drilled after printing
• ideal for functional prototyping
• for DLP and LCD-type 3D Printers

  Technical Specification  

• Volume: 0.5kg or 1kg
• Color: Black/Grey/White/ or Clear
• Surface Hardness: Shore 88D
• EAB: 11-20 %

• Viscosity: 150-200 MPa.s
• Glass transition temperature: 100C
• Volume shrinkage: 3.72-4.23%
• Linear shrinkage: 1.05-1.35%
• Flexural modulus: 1.779-1.835Mpa
• Flexural strength: 59-70Mpa
• Density: 1.05-1.13g/cm3
• Tensile strength: 36-52Mpa
• Tensile modulus: 1.779-1.835Mpa
• Curing time: 6-10 S
• Impact strength: 44-49 J/m

Compatible with

• Phrozen
• Anycubic
• Elegoo
• Creality
• Flashforge
• Most LCD-type 3D Printers
• Can be used on DLP 3D Printers with (405nm)

Resin Settings

 

• For the resin settings please check the "Downloads" section

• Make sure to store the resin in dark and room temperature
• Always wear protective gloves during working with resin
• For more information please check the "Downloads" section

  Warranty  

• Please visit Terms and Conditions page
• If you have any questions do not hesitate to contact us