Henkel/Loctite 3D Resin 3840 – Grey (1L)

Henkel/Loctite 3D Resin 3840 High Accuracy in the color Grey is an acrylic liquid resin used for prototyping which cures with very short exposure to monochromatic light sources. 3840 Resin is a low-viscosity, one-component light-cure acrylic resin used for prototyping via stereolithography (SLA) or digital light processing (DLP). It cures with short exposure times which results in fast print speeds and provides very high print resolution which is ideal for parts that require fine features. It has low shrinkage upon curing, maintaining part dimensions from conception to production.

• semi-rigid resin
• fine print resolution
• exceptional surface finish
• past printing speed
• excellent compatibility with PDMS coatings
• ideal for general prototyping
• for SLA and DLP 3D Printers

Technical Specification

• Volume: 1L
• Viscosity: 120-300 cP
• Density: 1.1 g/cm3 liquid
• Surface Hardness: 70 Shore D
• Tensile Strength: 20-30 MPa
• EAB: 15-20 %
• IZOD Impact (Notched): 2.0-2.5 kJ/m2

• Make sure to store the resin in dark and room temperature
• Always wear protective gloves during working with resin
• For more information please check the "Downloads" section 

Warranty

• Please visit Terms and Conditions page
• If you have any questions do not hesitate to contact us