Old Stock!Henkel/Loctite 3D Resin 5015 – White (1L)

Henkel/Loctite 3D Resin 5015 A80 Elastomeric in the color White is a single-component silicone tough elastomer material with little post-processing needed to achieve great results The material is recommended for DLP and SLA technology and is ideal for gaskets, seals, tubes, and functional prototyping applications. Ideal for elastomeric prototypes that require higher stiffness. The resin has low shrinkage and very good adhesion between layers.  

• good interlayer adhesion
• low shrinkage
• stable at temperatures up to +100°C and down to -20°C (better vs. other market option that deteriorates at T >50°C)
• only a little post-processing needed
• ideal for functional prototyping - gaskets, seals, tubes
• for SLA and DLP 3D Printers

 

Technical Specification

 

• Volume: 1L
• Viscosity: 600 mPa.s
• Surface Hardness: 80 Shore A
• Tensile Strength: 8 MPa
• Young’s Modulus: 5.5 MPa
• EAB: 160%

 

• Make sure to store the resin in dark and room temperature
• Always wear protective gloves during working with resin
• For more information please check the "Downloads" section

  Note  

• the resin expired in May 2021

  Warranty