Henkel/Loctite 3D Resin IND147 HDT230 High Heat is a high-temperature resistant resin with HDT 230°C and good dimensional stability for low loads processes in molding applications. Its unique properties make it ideal for applications such as polyurethane and silicone molding. The material is compatible with DLP-type 3D printers. IND417 shows a good surface finish and sufficient toughness to withstand mechanical stress from the molding process. 

• high-temperature resistance - HDT >230 °C
• tough with good dimensional stability
• good surface finish
• ideal for functional prototyping - tooling at high temperature, low pressure, prototyping of high-temperature parts, customized molds, silicone molding
• for DLP 3D Printers

Technical Specification

• Volume: 1KG
• Viscosity: 2,100 + 200 cP
• Surface Hardness: 94 Shore D
• Tensile Strength: 67 ± 16 MPa
• Young’s Modulus: 3190 ± 80 MPa 
  
• EAB: 2.4 ± 0.7% 
• Izod Impact Strength (Notched):  14.6 ± 0.1 J.m
• HDT at 0.455 MPa:  291 ± 15°C
• HDT at 1.82 MPa: 163 ± 4°C

• Make sure to store the resin in dark and room temperature
• Always wear protective gloves during working with resin
• For more information please check the "Downloads" section 

Warranty