Monocure 3D Resin Rapid Dental was developed to have high dimensional stability, a gypsum-like texture, a unique matte finish, and an opaque color for all 3D printed dental model processing. This resin allows for highly accurate printing in the range of 100 to 25 microns. The finished surface is very smooth and hard, which helps create precise angles, optimize print quality, and reduce the rate of print failures.

• easy to use
• high accuracy
• unique gypsum-like texture
• hard surface finish - 80 Shore D after post-curing
• ideal for dental applications - models of teeth, models of gums, prototypes of dentures, prototypes of crowns, prototypes of bridges. The resin is not recommended for intraoral use. 
• for LCD-type 3D Printers

Technical Specification

• Colour: Beige
• Formula: Rapid
• Viscosity: 300-500cps @ 25°C (Brookfield RVT)
• Odor: Negligible Characteristics
• Hardness: 80 Shore D
• Exposure energy: 19 mJ / cm 2
• Resolution: 0.02 – 0.085mm
• Tensile strength: 47 Mpa
• Elongation at break: 6%
• Shrinkage: <0.1%
• Volume: 1250ml
• Weight: 1.4kgs 

• Make sure to store the resin in dark and room temperature
• Always wear protective gloves during working with resin
• For more information please check the "Downloads" section