Monocure 3D Resin Rapid Flex100 has an extremely high level of flexibility so you can 3D print compressible and bendable models. The thinner the part, the more flexible it will be. Flex100 can be used on its own or by mixing with the other resin systems from Monocure to produce varying degrees of flexibility and firmness. By adding a small amount of Flex100 to the other resins from Monocure would create a less brittle and more durable part. By adding larger amounts, the more flexible it will become.
Remember to use scales to weigh the resins so results can be repeated. The recommdation is to make 100grams at a time to keep the ratios simple. For example, for a firm, durable resin try 25:75 mix – 25 grams of Flex10 to 75 grams of hard resin. For a very flexible version, you could try 90:10 mix 90 grams of Flex100 and 10 grams of hard resin.
IMPORTANT: When mixing Flec100 with the other resin systems, please ensure that you cure for a long enough time to fully cure the flexible resin. This is a slower curing resin and takes more UV exposure to fully cure. Although the part might look perfectly formed, if it hasn’t been cured for long enough, cracks may appear due to the resin being under cured.
- truly flexible resin - a 3D Printing resin that is fully flexible when printed. Perfect for Prototype models that require these properties
- high impact - adding as little as 10% FLEX100™ into your hard resin can allow it to be dropped without breaking
- ultimate additive - can be used to mix with hard resins to give you different degrees of hardness and flexibility
- low viscosity
Technical Specification
- Color: Clear
- Viscosity: 30-50 cps @ 25°C
- Odor: Negligible
Safety Rules
- Make sure to store the resin in dark and room temperature
- Always wear protective gloves during working with resin
- For more information please check the "Downloads" section
Warranty