Monocure 3D Resin Rapid Model was initially developed with MSLA printers that use LED arrays to cure the resin. The unique, epoxy-based system creates models that process a hard surface finish without the brittleness you would expect. This resin is easy to use; give the bottle a quick shake, then pour and print! The typical normal layer durations for an MSLA printer are approx. 2-3 seconds in a printer with a monochrome LCD Screen.   The Rapid Resins should be post-cured for at least 20-30mins after cleaning. This ensures that the model will not crack or split over time.  

• easy to use
• wide range of colors
• ultrafast - Rapid Model Resins can print fast on all MSLA 3D printers, with 2 -3 second normal layers on most Monochrome 3D printers
• smooth detailed finish - a unique, epoxy-based resin prints at high detail 3d printing resin without brittleness
• ideal for general prototyping
• for LCD-type 3D Printers

  Technical Specification  

• Color: White/ Black/ Blue/ Clear/ Grey/ Green/ Red/ Gunmetal Grey
• Elongation: 3%
• Hardness (Shore): 75 D
• Max Force: 1.64 kN
• Tensile Strength: 47 MPa
• Young's Modulus: 1.8 GPa
• Flexural Stress: 124 MPa
• HDT(°C): 55
• Size: 1L

 

• Make sure to store the resin in dark and room temperature
• Always wear protective gloves during working with resin
• For more information please check the "Downloads" section

  Warranty  

• Please visit Terms and Conditions page
• If you have any questions do not hesitate to contact us