Phrozen Resin ABS-like in color Gray creates high-resolution, sturdy 3D-printed parts that are best for general modeling and industrial applications. After printing the models are easy to paint. 

• high precision - high-quality prints
• low shrinkage - low warpage and dimensional stability
• low viscosity and low odor - easy to print and post-process due to very low viscosity. Almost no smell does not disturb during the printing process. 
• wide applications - create tough and resilient parts that can be used for printing miniatures and for industrial parts

Technical Specification

• Volume: 5kg 
• Viscosity: 60-100 cps
• Density: 1.1 g/cm3
• Surface Hardness: 76 Shore D
• UTS: 10 MPa
• Tensile modulus: 116 MPa
• EAB: 3%
• Izod notched impact strength: 1.44 KJ/m2
• HDT at 0.45MPa: 46 ℃

• Make sure to store the resin in dark and room temperature
• Always wear protective gloves during working with resin
• For more information please check the "Downloads" section 

Warranty

• Please visit Terms and Conditions page
• If you have any questions do not hesitate to contact us