Raise3D Filament Premium ASA – Black (1.75mm)

Raise3D Filament Premium ASA is an amorphous, opaque thermoplastic that is structurally similar to ABS. In many cases, they are quite interchangeable in purpose but ASA has a few key differentiating features that make it suitable for certain applications over ABS. ASA is significantly more resistant to UV light and weathering, making it the better choice for applications with extended outdoor exposure. ASA can boast slightly better mechanical properties but it can also cost slightly more in some cases. Because ABS is so popular and has many more options, it is generally recommended to go with ABS unless outdoor exposure is a concern.

• similar to the properties of ABS - but ASA has a few key differentiating features that make it suitable for certain applications over ABS
• more resistant to UV light and weathering  - great for applications that are meant to be for outside
• great mechanical properties
• high heat resistance
• ideal for prototyping and testing in many industries - great for outside applications
• for most FFF/FDM 3D Printers

Technical Specification

• Package size: 1 kg 
• Density: 1.1g/cm3
• Glass Transition Temperature: 97.8℃
• Tensile Strength: 43.8± 0.8MPa
• EAB: 6.7 ± 0.6%
• Young's Modulus: 2379 ± 157 MPa
• Impact Strength: 10.3 ±0.4 kJ/㎡
• Nozzle Temp: 240-260℃
• Bed Temp: 75-95°C
• Printing Speed:  30-50mm/s

• Make sure to store the filament in a dry place in tightly closed containers
• For more information please check the "Downloads" section 

Warranty

• Please visit Terms and Conditions page
• If you have any questions do not hesitate to contact us