Gorilla Glass Front Glass 5.5″

15,95 NL VAT incl. 21%

Not available

  • Spare Part - front glass
  • Protection glass for LCD screen
  • 5.5"
  • Compatible with Wanhao D7(+), Anycubic Photon, and many other LCD-type 3D Printers
SKU 1024
Brand OEM

Product description

The replacement/ spare part for Wanhao D7(+), Anycubic Photon, and many other LCD-type 3D Printers


Front glass for 5.5" LCD  UV 3D Printers. Gorilla glass screen guard to help to protect your LCD from damage. The Screen guard has a sticky layer that will stick to the LCD. The bond between glass and LCD is removable. 

Notes & Warnings

  • This is a DIY part
  • Use at your own risk

Installing the screen guard

  • Remove LCD.
  • Stick frontglass to the LCD. Keep calm, and work slowly, and if bubbles appear go back and try again.
  • Place LCD with glass back into the machine
  • Because the LCD sits a bit higher than the top plate the edges of the screen guard float in the air - Be very careful not to land resin vat on these edges too hard - You can also reuse the tape by placing it under the floating edge of the screen protector.
  • Another option is to remove the backglass of the LCD (Experimental - use at own risk). The LCD is now only stuck to the front glass. This could lead to the sagging of the LCD in the middle.


    Removing Bubbles Removing bubbles should be done in a vacuum oven. If you don't have this, here are instructions for Wanhao D7 5.5" LCD 

    https://youtu.be/4PpsbfUWDiw


    Product specifications

    Brand OEM
    Product State New
    Country Of Origin China
    Part Types Others
    Machine Serie Universal, Anycubic Photon, Wanhao D
    Machine Model universal, Photon 2019, Wanhao D7

    Product downloads

    Information Brochure V22