This is a special Epax X1 edtition for dental and jewelry applications where finer details are needed as well as a more even distribution of the light across the entire build area.
- Parallel Matrix UV light source -- This is the most advanced light source, providing more print detail for dental and jewelry applications where finer details are beneficial as well as a more even distribution of the light across the entire build area.
- Light source closer to LCD screen - requiring less energy for printing and extending the life of your LCD screen.
- No Z-Wobble - This printer has an upgraded Z-axis carriage rail. It uses a double steel rod reinforced carriage and steel bearings. No calibration is required.
- Non-FEP Film for Resin Vat - Our nFEP film has a lower release force than standard FEP films, decreasing your likelihood of print failures caused by layers not releasing from the film.
- Ultra-Precise Fixed Build Platform - EPAX uses a stable 4-point mount. Your build plate is leveled at the factory and very rarely requires re-leveling.
- Better Chassis Design - Our printers have all-steel chassis with minimal windows for durability and minimal UV light contamination.
- Precise Z Homing - All printers are individually calibrated and leveled at the factory so you can begin printing out of the box.
- Better Door Hinge Design - The top door hinge allows you to position your printer against walls.
- 3.5-inch Color TFT Touchscreen.
- 2K (5.5 inch) LCD masking screen. 2560*1440 (2k) HD masking LCD allows for great print detail.
- Improved Z-axis stability.
- Pre-installed non-FEP film (Imported from Japan) to allow easier detachment during printing (you can still use standard FEP films with this printer if you prefer).
- Sanded build platform surface made of soft aluminum for better adhesion and easier print removal.
- Anti-Aliasing supported and enabled in installed firmware.
- Wide selection of supported resins - you can use any 405nm wavelength 3D printing resins.
- 115mm (L) *65mm (W) *155mm (H) build volume
- XY resolution reaches 0.047mm; Minimal Z layer height is 0.01mm
- Orange Window with External Ethernet port installed.
- LCD: 2K 5.5″
- XY Pixels: 2560*1440
- XY Axis Resolution: 47 micron
- Z Axis Resolution: 10 micron
- LED Array: 5*10 LED Array 40W 405nm
- Build volume: 115*65*155mm
- Anti Aliasing: Yes
- Build Platform: Metal sanded
- Touch Screen: 3.5"
- Window: Orange
- Ports: USB, Ethernet
- No resin included! Make sure you order resin to get started immediately.
- Due to the large size this printer we recommend this printer for advanced users only.
- 1 year factory warranty
- Excluded from warranty are consumable parts: LCD display, Buildplate, FEP Film and LED
- For customers outside EU and in remote areas warranty can only be given if customer takes responsibility for shipping costs.