Epax X1-N-DJ

Features

• Parallel Matrix UV light source -- This is the most advanced light source, providing more print detail for dental and jewelry applications where finer details are beneficial as well as a more even distribution of the light across the entire build area.
• Light source closer to LCD screen - requiring less energy for printing and extending the life of your LCD screen.
• No Z-Wobble - This printer has an upgraded Z-axis carriage rail. It uses a double steel rod reinforced carriage and steel bearings. No calibration is required.
• Non-FEP Film for Resin Vat - Our nFEP film has a lower release force than standard FEP films, decreasing your likelihood of print failures caused by layers not releasing from the film.
• Ultra-Precise Fixed Build Platform - EPAX uses a stable 4-point mount. Your build plate is leveled at the factory and very rarely requires re-leveling.
• Better Chassis Design - Our printers have all-steel chassis with minimal windows for durability and minimal UV light contamination.
• Precise Z Homing - All printers are individually calibrated and leveled at the factory so you can begin printing out of the box.
• Better Door Hinge Design - The top door hinge allows you to position your printer against walls.
• 3.5-inch Color TFT Touchscreen.
• 2K (5.5 inch) LCD masking screen. 2560*1440 (2k) HD masking LCD allows for great print detail.
• Improved Z-axis stability. 
• Pre-installed non-FEP film (Imported from Japan) to allow easier detachment during printing (you can still use standard FEP films with this printer if you prefer).
• Sanded build platform surface made of soft aluminum for better adhesion and easier print removal.
• Anti-Aliasing supported and enabled in installed firmware.
• Wide selection of supported resins - you can use any 405nm wavelength 3D printing resins.
• 115mm (L) *65mm (W) *155mm (H) build volume
• XY resolution reaches 0.047mm;  Minimal Z layer height is 0.01mm
• Orange Window with External Ethernet port installed.

Technical Specification

• LCD: 2K 5.5″
• XY Pixels: 2560*1440
• XY Axis Resolution:  47 micron
• Z Axis Resolution: 10 micron
• LED Array: 5*10 LED Array 40W 405nm
• Build volume: 115*65*155mm
• Anti Aliasing: Yes
• Build Platform: Metal sanded
• Touch Screen: 3.5"
• Window: Orange
• Ports: USB, Ethernet

NOTE

• No resin included! Make sure you order resin to get started immediately.
• Due to the large size this printer we recommend this printer for advanced users only.

Warranty

• 1 year factory warranty
• Excluded from warranty are consumable parts: LCD display, Buildplate, FEP Film and LED
• For customers outside EU and in remote areas warranty can only be given if customer takes responsibility for shipping costs.

Support

• Email customer support by Epax
• EU Warranty & Service by FEPshop
• Facebook community