ELEGOO Resin Standard 2.0 – Grey (1KG)

ELEGOO Resin Standard 2.0 in color Grey is a high-precision material with a  smooth surface finish and clear texture. The resin is easy to clean and can be used for most LCD-type 3D printers to print general models. 

• high precision - strong anti-background light ability so no excess resin is left on the surface of printed models, ensuring that each model is printed with a smooth surface
• low volume shrinkage - great stability
• low viscosity and good fluidity - the resin can quickly reflow to the area between the model and release film, which improves the printing success  rate and reduces printing time
• safe to use and low odor - specially formulated with less odor and less pungent smell during printing, thus maintaining a freshening printing environment
• wide applications - it is ideal for general prototyping and the material is compatible with most LCD-type 3D printers

Technical Specification

• Volume: 1kg 
• Surface Hardness: 80-86 Shore D
• Deformation at the Point of Max Force: 5.7±10% mm
• Yield Point Elongation: 6.18±10% 
• Tensile Strength: 33.21±10% MPa
• Tensile Modulus: 409.56±10% MPa
• EAB: 10.03±10%
• Flexural Modulus: 936.91±10% MPa
• Flexural Strength: 33.59±10% MPa 
• Impact Strength: 59±10% J/m

• Make sure to store the resin in dark and room temperature
• Always wear protective gloves during working with resin
• For more information please check the "Downloads" section