eSUN ePA in the color Natural was developed based on nylon 6/66 copolymer. Self-lubricating wear resistance makes it suitable for printing gears. High toughness and impact resistance, with an elongation at break of up to 175%, can print strong and durable parts with high fracture resistance. Low shrinkage, not easy to warp and crack when printing.

• high toughness
• high impact resistance
• self-lubricating wear-resisting
• excellent printability
• ideal for printing functional prototypes
• for most FFF/FDM 3D Printers

Technical Specification

• Package size: 1 kg 
• Density: 1.12 g/cm3
• Heat Distortion Temp (℃,0.45MPa): 50
• Tensile Strength: 52.45 MPa
• Flexural Strength: 58 MPa
• EAB: 175.32%
• Flexural Modulus: 1370 MPa
• Impact Strength: 18.4 kJ/㎡
• Extruder Temp: 260 – 290℃
• Bed Temp: 70 – 90°C
• Printing Speed:  40 – 100mm/s
• Heated Bed:  Required

Note

• Before printing, we suggest drying the filament for 12 hours at 70°C

• Make sure to store the filament in a dry place in tightly closed containers
• For more information please check the "Downloads" section 

Warranty

• Please visit Terms and Conditions page
• If you have any questions do not hesitate to contact us