eSUN Filament PLA – Orange (1.75mm)

eSUN Filament PLA in the color Orange is an environment-friendly material that is easy to print and has a smooth surface finish. Compared to ABS material, PLA has higher rigidity and strength similar to PC material. During printing with PLA, you do not need to close the cavity. The material has low shrinkage, does not warp, does not easily crack, and is suitable also to print large models. No smell when printing and safe for the environment. Ideal for conceptual models, general prototyping, and metal parts casting.

• high-speed printing
• smooth printed surface
• easy to print - no warping, no cracking, good printing stability
• not easy to break 
• ideal for general prototyping
• for FFF/FDM  3D Printers

Technical Specification

• Package size: 1 kg 
• Density: 1.2 g/cm3
• Heat Distortion Temp (℃,0.45MPa): 53
• Tensile Strength: 72 MPa
• Flexural Strength: 90 MPa
• EAB: 11.8%
• Flexural Modulus: 1915 MPa
• Impact Strength: 5.4 kJ/㎡
• Extruder Temp: 190 – 210℃
• Bed Temp: 45 – 60°C
• Printing Speed:  40 – 100mm/s

• Make sure to store the filament in a dry place in tightly closed containers
• For more information please check the "Downloads" section 

Warranty

• Please visit Terms and Conditions page
• If you have any questions do not hesitate to contact us