Pre-Order! Raise3D Resin Rigid 3K Grey V1 (1KG)

Raise3D Resin Rigid 3K Grey V1 is a material that was designed for stiff and strong parts where high strength, high rigidity, and heat resistance are required. Rigid 3K delivers excellent results in part accuracy as well as mechanical and thermal properties. The material is ideal for a wide range of engineering end-use parts under various working conditions, such as thin-wall functional parts, connectors, brackets, jigs & fixtures, and mounts and brackets.

• high accuracy 
• high rigidity - similar to glass fiber-reinforced thermoplastic materials
• excellent mechanical properties
• heat resistance
• engineering application - the printed parts are ideal for engineering end-use parts, great for thin-wall functional parts, connectors, brackets, jigs & fixtures mounts and brackets

Technical Specification

• Volume: 1kg 
• Viscosity: 515 cps
• Density: 1.148 g/cm3
• Young's Modulus: 1766 MPa (green)  3263 MPa (post-cured)
• Tensile Strength: 38 MPa (green) 78 MPa (post-cured)
• EAB: 30% (green) 14% (post-cured)
• Flexural Modulus: 1278 MPa (green) 3252 MPa (post-cured)
• Flexural Strength: 53 MPa (green) 139 MPa (post-cured)
• Izod notched impact strength: 24 J/m (green) 30 J/m (post-cured)
• HDT @0.45MPa: 97 ℃ (post-cured)

• works best with Raise3D DF2 3D Printer 
• fits perfectly for the Raise3D Auto-Feeding Solution

• Make sure to store the resin in dark and room temperature
• Always wear protective gloves during working with resin
• For more information please check the "Downloads" section