Graphy Cure THC 2

Graphy THC 2 (Tera Harz Cure) is a post-processing cure device made with high UV Energy and Irradiance in order to reach a rapid curing time. Maximized mechanical properties such as both flexural and tensile strength, and natural teeth shade. For the perfect photopolymerization with the ideal chemical reaction, it can adjust the UV Power (Lv.1 to Lv.5) and curing time. High-Power UV LEDs are located with an optimized arrangement on both the top and side.

• prevent shrinkage and discoloration
• reach full monomer conversion
• obtain the optimum tensile and flexural strength - to maximize material properties
• high power UV intensity and irradiance
• faster post-curing - 1-10 mins
• memory function - up to 5 Modes
• diagnostic function
• safety system -  auto power-off
• light uniformity
• big touch screen - 7.9"size

Technical Specification

• Light Source: UV LED
• Curing Time: 1-60min/ 5-55sec
• Input Voltage: 100-240VAC, 50/60 Hz
• Output Voltage: 24V, 12.5A
• Display: 7.9"TFT Touch LCD
• LED Wavelength: 405nm
• LED Power Output:  200W
• UV Energy density: 280.000 mJ/cm2
• The irradiance of UV: 1.000mW/cm2
• LED Operation Temp: 5-35°C
• Curing Chamber (Turntable): ⌀180x65mm
• Outer Dimension: 275x310x310mm
• Weight: 8.5kg

Note

• this is a UV Cure WITHOUT Nitrogen Generator

Warranty

• Please visit Terms and Conditions page
• If you have any questions do not hesitate to contact us